TestMart maintains high standards for packaging your delicate equipment.

PACKAGING

• Packaging of equipment will be in compliance with applicable specifications, manufacturer's recommendations whenever possible or to the specific requirements of the customer.
• Packing methods must ensure items are sufficiently protected to prevent damage.
• When required by contract, special packing material will be provided.

PACKAGING METHODS

• TestMart has limited number of acceptable packaging methods which when properly used ensure the safe transportation of their products.
• The specific type of packaging is dependent on the size and weight of the unit being shipped.
• The following are the three most common methods of packaging materials used by Testmart.
  1. Bubble Wrap
  2. "Loose fill" particles
  3. Instapak®

BOXING

• The recommended bursting strength for corrugated containers for the equipment shipped by TestMart is 275 pounds.
• The boxes purchased by TestMart are all double wall corrugated and meet this requirement.
• Three-inch reinforced gummed carton industrial sealing tape is used to seal cartons for shipping.

REUSING BOXES

• Reusing boxes is acceptable when returning equipment to a vendor (RTV) or sending equipment to the Original Equipment Manufacturer (OEM) for calibration or repair.
• All previous markings or labeling shall be removed or covered prior to shipment.
• Used boxes may only be reused if there is no possibility of jeopardizing the condition or status of the equipment.

PALLETIZING

• Containers weighing from 75 to 150 pounds in most instances, should be palletized for ease of handling and to preserve the safely of the equipment.
• Items weighing in excess of 150 pounds must be fitted with pallets.
• When multiple boxes are transported on a single pallet: banding straps, stretch wrap or a combination shall be used to secure those boxes on the pallet.